Avoid the fear and anguish experienced by parents and bus drivers from a child being lost or injured after being left alone aboard a bus. To eliminate these occurrences, Doran Mfg. strongly believes the Sleeping Child Check Monitor® should be an industry safety standard. This device reminds the driver to move to the rear of the bus before exiting, thereby enforcing a search for any child that may be left behind.
Warning lights are activated when children enter the bus (any 12-volt source could activate the system such as a dome light). The Sleeping Child Check Monitor® is turned on and becomes engaged when the ignition of the bus is turned off. In order to deactivate the monitor, the bus driver must move to the back of the bus and depress a button on the monitor. If a driver fails to deactivate the monitor and exits a door, the horn will sound reminding him or her to make a sleeping child check.
The Sleeping Child Check Monitor® (Doran part # SCC-AM) by Doran Mfg. is easy to install and its heavy duty construction prevents breakage.The switch is mounted at the rear of the bus. If there is an emergency exit door at the rear, the monitor is mounted above it. This prevents the driver from deactivating the monitor from the outside of the bus. The Sleeping Child Check Monitor® can be installed on new buses and is available as an aftermarket safety product that can be installed on many of the buses currently on the road.
The Doran Sleeping Child Check Monitor comes with a five-year warranty covering all parts. Doran Mfg. also manufactures a Combination Emergency Exit and Sleeping Child Check Monitor®. For additional information about this product, check out the Sleeping Child
Check product documentation, operational specifications, and installation manual.
Get Adobe Acrobat Reader